NICK VLOGG: What to review on the plow before the season?

Step 1: Checking the hydraulic system of the plow The first most important thing is to check the hydraulics. Starting from the tractor, all hoses and hydraulic connections, as well as cylinders, are checked. The second most important here is the inspection and verification of the greasing points - usually they are indicated by the manufacturer and each mechanism can easily navigate what needs to be checked. The main element that needs to be greased every day is the suspension of the plow to the headstock and to the tractor. Note: If you have a wagon plow (the so-called 3in1 plow) there is another headstock and additional hydraulics, which should also be checked, analogous to the previous advice. The advantage of this type of plow is that in severe conditions the second module can be removed and hooked up to a smaller tractor, thus having 2 plows.

Step 2: Checking the wheel cylinder The next mandatory step is to check the cylinder that holds the wheel when turning. There should be no knocks or drops from the adjusting screw. In the wagon plow there are two support wheels, and therefore it is necessary to check each of them.

Step 3: Checking the support wheelsThe third important step is also checking the bearings and the support wheels. Here we check their strength and whether the tires are inflated according to the manufacturer's prescriptions. Also being in this area it is good to check how well the limit screws are tightened to avoid a change in depth during operation.

Step 4: Checking the Plough SettingsEach Kverneland plow is equipped with the necessary tools, with which you can change the settings at any time. You have two keys with which you can replace worn elements or adjust the screws. On each detail there is a sticker with a prescription to what centimeters each screw should be adjusted to.

It is also important to make a correct adjustment of the angle sliders (dashboards). Their corner should rest against the bookmark board so that there is no distance between them. Otherwise, plant residues may collect in this area, which will unnecessarily load the machine.

Bonus tip: The additional advice that the service specialists of the NIK give is a comprehensive examination of the wearing working bodies, such as awls and solders and, in the presence of wear, to replace them. In order to save unnecessary time and be ready for plowing at any moment, it is advisable to provide a certain number of spare parts with you on the farm in advance. One of these elements for the plows with bolt protection are the original safety bolts, which guarantee you a longer life of the plow. If you want to receive more interesting and useful information, subscribe to the NIK channel at Youtubeas well as our special email newsletter!