Kverneland 2500 i-Plough

ISOBUS plow for all types of conditions

From transport position to working position in record time, and directly from the tractor cab:

Smart: the necessary plow settings are adjusted from the tractor cab.
Easy: the ISOBUS terminal clearly shows how to adjust the plow with simple commands.
Unique: 10 innovations that make life easier for operators and managers.

Wheels:

280/60 x 15,5* or 420/55 x 17 (mechanical or hydraulic adjustment)
Beam: 60 x 30cm
* also available frame-mounted

Sturdiness:

Kverneland steel and heat-treatment technologies applied across the entire plough!
Kv 2500 S: Auto-Reset. No maintenance required! Kv 2500 B: bolt protection for the working bodies
Recommended for tractors up to 280 hp (206 kW).
120 × 200 mm induction heat-treated frame that can be extended by 1 working body.
4 up to a maximum of 6 working bodies

Easy:

Operation and control via any of the terminals: Isomatch Tellus, Tellus Go or the tractor's terminal
Automatic calibration of plough settings against the tractor's rear-wheel setting as an option
FURROWcontrol RTK/DGP for following an A–B guidance line and automatically restoring the line after correction
Variomat with hydraulic control from the cab (12" to 24").

Innovative

Modern transport solution: the plough is pivotally attached to the headstock. During transport it behaves like a trailer. Time savings: transport and working positions are controlled from the cab as an option
Safe pivoting turnover
Skimmers: central working-depth adjustment as an option
Working-body protection: Auto-Reset option for HD; XHD hardness level.
Special design of the working-body foundations to avoid build-up in high-residue conditions