Service specialists advise: How to check your mower before the season?

The optimal and precise application of fertilizers ensures the application of the right amount of nutrients for the optimal development of crops. It is the even distribution of fertilizers that gives farmers peace of mind and security for the upcoming campaign.

To execute wheelbarrow its important duties, however, its technical condition must be well checked. This timely check will ensure the serviceability of the machine and its readiness for the subsequent precise fertilization at full speed.

How to properly check your mower?

The NIK service team presents several recommended steps for preparing the mower.

Always keep your machine thoroughly washed! Do not forget to also check that the hopper is empty and cleaned!

4 easy steps to check the grinder

After the farmers have made sure that their machine is well cleaned, a look at some of its parts follows. Always check and service the mower when the tractor is switched off!

Step 1: Check for corrosion on the chassis wheelbarrow

Part of the inspection is also the inspection of the wear elements, namely the blades of the machine. Here it is necessary to check whether they have wear and whether they are installed correctly. If it is necessary to replace the blades, it isvery importantfarmers should be aware of what blades they will need, that is, on what grip the machine will be operated on in the next season.

Another recommended step is also to check the power take-off shaft and its fuse. It is important to see what condition they are in the partsand yes them Replace as needed.

Step 2: Check the connectors of the left and right reducer

This can be checked after opening the inspection holes of the machine and manually moving one of the gearboxes. We advise you to also check the oil level in the gearboxes, topping up if necessary.

Step 3:Greasing

Greasing also needs to be done during the season. The thresher has several important areas for greasing:

• Left and right spreader mechanism;
• Actuators of the machine (2 or 4 per pcs.);
• Cardan (greasing the protective sleeve and carriage).

Step 4:It is advisable to inspect the parcel trimmer (ExactLine) — check that it is adjusted correctly and that it is lifted to the final position.

This check is necessary in order to achieve maximum good dispersion along the border of the plot.

After a thorough inspection and inspection of all the listed details on the grinder, you can be sure that your precision grinding machine, is completely ready for the next fertilization.

Bonus tip:Fertilizers are aggressive and can cause severe corrosion on your roastery. We advise you to use a spray “winter protection” from Kverneland to protect all metal parts and electronic sensors from corrosion. The specially developed winter cover will ensure trouble-free operation of your roastery.

If you need spare parts you can contact us at short number*9009 or send us online inquiry.

Need more information? The service specialists of NIKare at your disposal to assist you with all these and additional questions.

‍