NICK VLOG: How to make an adjustment when the discs of the disc harrow wear?

Once you have we told how to avoid poor processing, through proper tuning of your disc harrow, in the new episode of NICK Vlog we will show you how to properly adjust the discs of your machine when they have wear.

We go straight to the field in Byala Slatina, where Tsvetan Tsvetanov from NIK will tell us in detail how to adjust the discs, in case of wear of our Kverneland disc harrow.

“These are the disks of our machine. They are hardened from the outside to the inside,” Tsvetan Tsvetanov said.

Adjustment of the discs occurs in a few easy steps.

First of all, we measure the diameter of the disk.

“And then we look at the table that was given by the manufacturer and we assess whether it is necessary to make a correction,” explained Tsvetan Tsvetanov.

The next step is to adjust the position of the disks.

“Through this screw. The precise adjustment allows good compatibility between the front and back row of discs even after wear,” added Tsvetan Tsvetanov.

And now we proceed to the distributor of the machine and the hydroaccumulators, where the service specialist of NIK will tell us what they are for.

“They serve to pick up vibrations when transporting and operating the machine. You can see for yourself how the hydroaccumulators work and copy the necessary vibrations during operation and transport,” said Tsvetan Tsvetanov.

Remember, only the correct setting and adjustment of your disc harrow, will guarantee you good processing with excellent subsequent results!

If you want to receive more interesting and useful information, subscribe to the NIK channel at Youtubeas well as our special email newsletter!

‍